This is how they should have been made from the factory! 12 Gauge Stainless Steel. Slightly larger than the original factory part with increased strength. This part will replace the inside spike for the small frame Stihl saws and other models that use the same part numbers.
Stihl Models:
Top-Handle: 020T, MS 192T, MS 193T, MS 194T, MS 200T, MS 201T
Small: 017, 018, MS 170, MS 171, MS 180, MS 181, 020, MS 200, MS 201
Mid-Range: 021, 023, 025, MS 210, MS 211, MS 230, MS 250
Electric: MSE 140, MSE 160, MSE 180, MSE 200
Off-Brand / Clone Saws:
Holzfforma: G111, G180, G250
Farmertec: MS200T replacement kits.
JonCutter: G2500 (Note: some smaller 25cc clones use a different pattern)
12 Gauge Stainless Steel. Our hybrid design is the best of both worlds between OEM and our Wide Mouth’s. We worked with people that use their saws everyday to put trees on the ground. This part will replace the inside spike for the small frame Stihl saws and other models that use the same part numbers.
Stihl Models:
Top-Handle: 020T, MS 192T, MS 193T, MS 194T, MS 200T, MS 201T
Small: 017, 018, MS 170, MS 171, MS 180, MS 181, 020, MS 200, MS 201
Mid-Range: 021, 023, 025, MS 210, MS 211, MS 230, MS 250
Electric: MSE 140, MSE 160, MSE 180, MSE 200
Off-Brand / Clone Saws:
Holzfforma: G111, G180, G250
Farmertec: MS200T replacement kits.
JonCutter: G2500 (Note: some smaller 25cc clones use a different pattern)
12 Gauge Stainless Steel. The wide mouth design helps with those difficult angles dangling in a tree! We worked with people that use their saws everyday to put trees on the ground. This part will replace the inside spike for the small frame Stihl saws and other models that use the same part numbers.
Stihl Models:
Top-Handle: 020T, MS 192T, MS 193T, MS 194T, MS 200T, MS 201T
Small: 017, 018, MS 170, MS 171, MS 180, MS 181, 020, MS 200, MS 201
Mid-Range: 021, 023, 025, MS 210, MS 211, MS 230, MS 250
Electric: MSE 140, MSE 160, MSE 180, MSE 200
Off-Brand / Clone Saws:
Holzfforma: G111, G180, G250
Farmertec: MS200T replacement kits.
JonCutter: G2500 (Note: some smaller 25cc clones use a different pattern)
At the forefront of creative design, we challenge the conventional, merging artistry with cutting-edge technology to transform OUR visions into reality.
We are America’s most Patriotic Design Team! We strive to provide unique and innovative AMERICAN MADE products. WE offer Tool Accessories and Tool Storage.
Not only do we offer products but we offer some services as well. These include but are not limited to; Welding, Fabrication, Cad Design. If you need any service or would like to discuss a custom project please use the contact tab and send us a message!
OUR FAVORITES
Here’s a few of our customer favorites! Even though these are readily avaliable…
We encourage you to browse through all of our products!!
Slightly larger than the OEM replacement. Meant for large felling. All AMERICAN MADE! Designed and cut in North Carolina out of quality 12 gauge stainless steel and individually anodized. Each one is unique! Designed to be a premium option over factory parts. Creating a better standoff from the case of the saw to allow a better pendulum effect when cutting.
THIS PART FITS SELECT STIHL SAWS. PLEASE CHECK COMPATIBILITY BEFORE PURCHASE. Please make the proper selections with your model. IF YOU DO NOT SEE YOUR SPECIFIC MODEL PLEASE CONTACT US!
Stihl:
Modern Professional: MS 462, MS500i (Captured nut clutch cover)
Legacy Professional: MS 440, MS 441, MS 460, MS 461, MS 640, MS 650, MS 660,MS 661 (non-captive clutch cover)
Vintage Professional: 044, 046, 064, 066 (non-captive clutch cover)
Shared Inner: MS 341, MS 360, MS 361, MS 362, MS400
Holzfforma:
G444 (non-captive clutch cover)
G466 (non-captive clutch cover)
G660 (non-captive clutch cover)
Neotec
All models based on the 660 chassis. (non-captive clutch cover)
Shorter than OEM. These are very similar to other competitors in the market. All AMERICAN MADE! Designed and cut in North Carolina out of quality stainless steel and individually anodized. Each one is unique! Designed to be a premium option over factory parts. Creating a better standoff from the case of the saw to allow a better pendulum effect when cutting
THIS PART FITS SELECT STIHL SAWS. PLEASE CHECK COMPATIBILITY BEFORE PURCHASE.IF YOU DO NOT SEE YOUR SPECIFIC MODEL PLEASE CONTACT US!
Stihl:
Modern Professional: MS 462, MS500i (Captured nut clutch cover)
Legacy Professional: MS 440, MS 441, MS 460, MS 461, MS 640, MS 650, MS 660,MS 661 (non-captive clutch cover)
Vintage Professional: 044, 046, 064, 066 (non-captive clutch cover)
Shared Inner: MS 341, MS 360, MS 361, MS 362, MS400
Holzfforma:
G444 (non-captive clutch cover)
G466 (non-captive clutch cover)
G660 (non-captive clutch cover)
Neotec
All models based on the 660 chassis. (non-captive clutch cover)
Our brand vision
Here at Half-Lit Design we are proud to be AMERICANS! We are also proud to support the people that make these things possible! The ultimate dream here at Half-Lit Designs is to employ the transitioning warfighter and veterans with the intent to provide a launch pad for a promising career in whatever they would like to pursue beyond the military. We are also PROUD to support multiple non-profits in the Western North Carolina Region!
Our passion for Patriotism and Freedom, drive us to redefine the boundaries of what seems possible to achieve.
“Let us therefore animate and encourage each other, and show the whole world that a Freeman, contending for liberty on his own ground, is superior to any slavish mercenary on earth”
Follow us on social MEDia!
